Saffire mix control catalina how to#
Saffire mix control catalina update#
Saffire mix control catalina pro#

The mixes combine in the following way: Mix 1 with Mix 2 and vice versa, Mix 3 and 4, Mix 5 and 6, etc. However, the stereo button on the mix output aggregates that mix with the one next to it, and the mix tab at the top of the screen expands. a Channel Fader, and Mute, Solo, and Stereo buttons. The controls are essentially the same as those found in the mixer channels, i.e. The audio from the separate mix channels then goes to the mix output, which is situated at the right-hand end of the mixer section. I already downloaded the Mix controller Software. I have the Firewire cable to Thunderbolt 2 adapter to a Thunderbolt 3 into the port.

Saffire mix control catalina pro#

It is also possible to name the channel by clicking in the box below the Mute and Solo buttons. Im using my Focusrite Sappire Pro 40 interface and trying to get it to work with my new Mac Book Pro 13' Laptop MacOS on Catalina 10.15.4. Stereo – Aggregates the 2 mono channels together into a single stereo channel with shared controls.Preview the selected channel before the level is altered by the channel fader.

Channel Fader – adjusts the level of the channel.

Pan – adjusts the balance between left and right speakers.

The inputs selected will be the same in each of the mixes, however, the other controls are specific to each mix.

Saffire mix control catalina update#

Inputs are all the audio inputs on your interface (both analogue and digital), and DAW contains all the audio channels being sent back to your interface from your computer (Digital Audio Workstation). I have been happily using the Saffire Mix Control (version 3.7) to set up my Saffire Pro40 on a Mac (MacOS 10.14.5) but I fear that it will stop working with the next MacOS update (Catalina) because that OS won't run non 64-bit software. The possible inputs are divided into streams grouped by source, as shown in the drop-down menu above.

Saffire mix control catalina how to#

For more information on how to do this, refer to the Focusrite MixControl tutorial video. In Saffire MixControl, make sure your outputs are set correctly. The monitor knob on the smaller Saffire Pros governs Line Outs 1 and 2. This is done by clicking in the box above the pan control in the channel, as shown below. On the smaller Saffire Pros, there is no section on the back labeled Monitor Outputs, but rather just Line Outs. The first thing that you need to do is to select an input for the channel. Let’s start by focussing on a pair of channels in the mix window: With the PRO 24 and PRO 24 DSP, this number is halved. When used with the PRO 40 and the Liquid Saffire 56 (pictured above), Saffire MixControl contains up to 16 mono or 8 stereo mixes. It is worth noting, however, that this section of the Mix Control software has no effect on the signal being passed into your computer. The first section of this Mix Control tutorial focuses on the top half of the control panel (shown below), and how to use it to create custom mixes that can be routed to any of the outputs on your interface. Applies to: Saffire Range and 1st Generation Scarlett 6i6, 8i6, 18i6, 18i8 and 18i20